manualshive.com logo in svg

Panasonic DMR-BWT955GL, Service Manual

Share
Download
Panasonic DMR-BWT955GL Service Manual Download Page 30

30

3. USB-HDD Diagnosis

<Diagnosis Result Value>

Example: USB-HDD is not recognizable.

0

No abnormality was detected from USB-HDD inspection. 
Please check other diagnosis items.

1

No USB-HDD is connected or some other device is connected. Check to see if
there is any problem with the USB cable connection or the voltage power sup-
ply.
If there is no problem with the supply voltage or connection, there is a high pos-
sibility of USB-HDD unit defect.

2

An abnormality that can be determined as USB-HDD failure was detected.
Replace the USB-HDD unit.

6

If multiple USB-HDD units are connected.

7

If an unsupported USB-HDD is connected.

8

Unable to execute the Diagnosis Code Function normally.
There is a possibility of malfunction in the digital P.C.B. side.

Other

The Input Code is not correct. Please check the Diagnosis Code again.

Summary of Contents for DMR-BWT955GL










































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands