manualshive.com logo in svg

Panasonic DMR-BWT955GL, Service Manual

Share
Download
Panasonic DMR-BWT955GL Service Manual Download Page 25

25

3.10. Description of the Self Diagnosis <Operation Method, Details>

3.10.1. How to check the diagnosis code 

This device can display the device information with a 16 digit number (Diagnosis code) on the monitor in order to promptly check
the device status.

3.10.1.1. Procedure of the diagnosis code check

1. Turn power on. (E-E mode without recording or running as a server)
2. Press and hold [5], [9] and [Red] buttons on the remote control simultaneously for 5 seconds or more until front display 

indicates "70 RET" as shown below.

3. Press [POWER] button on the main unit or [   ] on the remote control several times until front display indicates "96 DIC".

Front display indicates as follows by pressing [POWER] or [   ] button.

* If front display indicates "-- -- --" or enter to the other mode, reset by pressing [POWER] button and repeat from first step.

4. Press [OPEN/CLOSE] button on the main unit or [OK] button on the remote control to run self diagnosis.

Summary of Contents for DMR-BWT955GL










































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands