Convenient functions
Software (Firmware) Update
You cannot operate the unit until the update
is complete. Don’t remove the AC mains lead
during the update. Removing the AC mains
lead while the update is in progress may
damage the unit.
Update software (firmware) of this unit
Software of this unit can be updated
automatically by the following methods at the
specified time.
• From broadcasts
(Default setting is 3 a.m. O 100, Software
Update in Standby)
IDVB-C
I The CATV terminal connection is not
applicable to this function.
• From Internet
Network connection and setting are
required.
(O 20, 24)
If a software (firmware) update is available, a
notification is displayed.
New software version has been found.
The software will be updated automatically after this unit is
switched to standby.
Do not disconnect the AC mains lead.
Update of the software (firmware) will start
when the unit is turned to standby mode.
To update the software (firmware)
immediately
Use the “Software Update Now ( Broadcast
)” function or “Software Update Now (
Internet )” function. (O 100)
cn
•
It may take up to a few hours until the update is completed
depending on the network environment.
•
The timer recording always takes preference over the
software (firmware) download; if the timer recording is
scheduled to start, the downloading will be performed at the
next opportunity.
•
For the latest firmware update information, please refer to
the Panasonic support site below.
•
You can also download the latest software (firmware) from
the following website.
http://panasonic.jp/support/global/cs/
CI Plus compatible CAM software
(firmware) update
Software (firmware) of CAM (compatible CI
Plus) can be updated automatically from
broadcasts. Availability of software (firmware)
update is detected while viewing the
programmes that are compatible with CI Plus.
1
When notification is displayed on the
screen, select “Yes” and press [OK].
• If for some reason the notification is not
displayed, or if cancelled, the
notification is instead displayed on the
channel information (^ 29).
e.g.,
a
NEWS
10:30
9:00 - 11:00
All DVB Channels
DOO
Now^
CAM Upgrade Info Change category
Dolby D
LMJLMJI^
L
J
I
_@
J
To execute CAM software upgrade,
press the red button.
2
Follow the instructions on the screen.
a
•
Do not remove the CAM from this unit while updating.
•
CAM software (firmware) update notice is not displayed in
the following cases:
-
When recording a programme
-
When timer recording and CAM update occur
simultaneously
-
When displaying FUNCTION MENU, DIRECT
NAVIGATOR, etc.
•
Operations such as view, playback, or record cannot be
performed while upgrading the CAM.
Any buttons on the remote control or the unit cannot be
used while upgrading the CAM.
•
If the timer recording is started, CAM software upgrade is
cancelled to start recording.
•
For details, refer to your CA
M’s operating instructions or
consult your dealer.
VQT4W71
101
Summary of Contents for DMR-BCT835
Page 11: ...u r 10 VQT4W71 ...