Se
tti
n
g
s
33
VQT3B75
TV System
Perform the setup so it matches the TV System of the
connected TV.
≥
When NTSC contents are played, they are outputted in the
signal format specified in the “NTSC Contents Output”,
irrespective of the settings here.
Network Easy Setting (
>
13)
Network Settings
Perform network-related settings individually.
Press [OK] to show the following settings:
(Continued on the next page.)
HDMI Audio Output
This setting selects whether or not to output audio from
HDMI.
≥
Select “Off” when the TV is connected to this unit via an
HDMI terminal, and this unit is also connected to other
devices, such as an amplifier/receiver via an OPTICAL
terminal.
VIERA Link
Set to use “HDAVI Control” function when connected with
an HDMI cable to a device that supports “HDAVI Control”.
≥
Select “Off” when you do not want to use “HDAVI
Control”.
Deep Colour Output
This setting is for selecting whether to use Deep Colour
Output when a television that supports Deep Colour is
connected.
Contents Type Flag
Depending on the playback content, the TV will output
adjusting to the optimal method when a TV that supports
this function is connected.
Network
LAN Connection Mode
Select connection method.
Wireless Settings
This allows the Wireless router and connection settings to
be set and the current connection settings and connection
state to be checked when a wireless connection is used.
Connection Setting
The Wireless router connection wizard will be displayed.
Double Speed Mode Setting (2.4GHz)
When a 2.4 GHz wireless format is used, this setting
sets the connection speed.
≥
If you connect using the “Double Speed Mode
(40MHz)”, two channels use the same frequency
band, and there is consequently a greater risk of
reception interference. This can cause the connection
speed to drop or the connection to become unstable.
IP Address / DNS Settings
This is for checking the state of the network connection
and setting the IP address and DNS-related.
Press [OK] to show the respective setting.
≥
“Connection Speed Setting” is enabled only when
“Connection Speed Auto-Config” is turned “Off”.
Proxy Server Settings
This is for checking the state of connection with the Proxy
server and performing settings.
Press [OK] to show the respective setting.
Internet Content Settings (
>
24) (VIERA
CAST)
Press [OK] to show the following settings:
Lock
You can restrict the usage of VIERA CAST.
≥
Follow the on-screen instructions. Enter the 4-digit
password with the number buttons when the password
screen is shown.
Audio Auto Gain Control
Volume that is different depending on the contents is
adjusted automatically to the standard volume while
using the VIERA CAST.
≥
Depending on contents, this function effect will not
work.
≥
Select “Off” when the audio is warped.
Time Zone
By selecting the time zone, it is possible to set the unit’s
time to match your location.
≥
Some VIERA CAST contents require the time zone to
be set. Set the time zone if necessary.
Summer Time
≥
Select “On” when using Daylight Saving time.
Network Drive Connection
It is possible to access the shared folder of equipment not
compatible with DLNA, such as the Windows XP operating
system, and play back video, still pictures, and music on
this unit.
For the setting and operation method of connected
equipment, refer to the following Website.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
DMP-BDT310_110EB-VQT3B75.book 33 ページ ２０１１年２月２１日 月曜日 午後５時１７分
