Panasonic DMP-BD85EB, Service Manual

Page: 33 / 81

33
10.2.4. Slide Cam
1. Perform the step “10. 2. 3. Pulley Gear, Belt”.
2. Remove the Sheet.
3. Disconnect the 3 FFCs.
4. Remove the 2 Screws (B) and the Angle.
5. Remove the Drive P.C.B..
Caution:
Though the Drive P.C.B. is not supplied as replace-
ment parts, it must be removed for after disassem-
bling.
6. Open the connector lock, and disconnect the FFC.
7. Remove the 2 Screws (C), and remove the Traverse
Base Ass'y with spreading the 2 hooks to the direction of
arrows.
8. Remove the Slide Cam.
10.2.5. Intermediate Gear, Drive Gear and
Loading Motor
1. Perform the step “10. 2. 4. Slide Cam”.
2. Remove the Intermediate Gear and Drive Gear.
3. Remove the Screw (D).
4. Remove the Screw (E), and remove the Switch P.C.B.
with the Loading Motor.
Remove the 2 soldering points, and remove the Loading
Motor.