27
9.1.3.
Top Case
1. Remove the 3 Screws (A) .
2. Slide Top Case rearward and open the both ends at rear
side of the Top Case a little and lift the Top Case in the
direction of the arrows.
9.1.4.
Front Panel ass’y
9.1.4.1.
Tray Top
1. Put deck so that bottom can be seen.
2. Insert the Paper clip, etc. into the hole on the bottom of
BD Drive and slide the Paper clips, etc. in the direction of
the arrow to eject tray slightly.
3. Remove the tray top from the tray section.
9.1.4.2.
Front Panel
1. Unlock 6 tabs (A)-(F) turn. Pull with the Front Panel in the
direction of your side.
9.1.5.
Rear Panel
1. Remove the 3 Screws (A) and Screw (B).
2. Unlock 2 locking Tabs (A) to remove the Rear Panel.
9.1.6.
Power P.C.B.
1. Remove the 2 connectors.
2. Remove the 3 Screws (B).
Summary of Contents for DMP-BD75GA
