29
9.1.7.
BDP Drive and Digital P.C.B.
BD45PC/65PC:
1. Remove the Connector (A).
2. Remove the 3 Screws (B).
3. Remove the 4 Screws (C).
4. Put Digital P.C.B. on BD Drive and remove BDP/Digital
P.C.B. Module.
Caution:
To prevent the laser diode from the ESD damage, the OPU
FFC removed from the P.C.B. should be isolated with an
ESD prevention bag.
BD45P/65P/655P:
1. Remove the OPU FFC, and isolate it with an ESD
prevention bag (RPFC0114).
2. Remove the 18 Pin FFC.
3. Remove the 4 Screws (A) to remove the BD Drive.
4. Remove the Connector (A) and 3 Screws (B) to remove
the Digital P.C.B..
Caution on assembly:
When remove the ESD prevention bag, do not touch the
OPU FFC conductive surface, to avoid ESD damage.
9.1.8.
Power P.C.B.
1. Remove the connector (A).
2. Remove the 3 Screws (B) to remove Power P.C.B..
Summary of Contents for DMP-BD45P
