Panasonic DMP-BD Series, Service Manual

Page: 33 / 72

S-1
S1. About Indication of The Schematic Diagram ............................ S-1
S1.1. Important Safety Notice......................................................... S-1
S2. Voltage and Waveform Chart ................................................... S-2
S2.1. Audio Out P.C.B. ................................................................... S-2
S2.2. Power_P P.C.B. ..................................................................... S-2
S3. Block Diagram .......................................................................... S-3
S3.1. Power Supply Block Diagram................................................ S-3
S3.2. Analog Audio Block Diagram ................................................. S-4
S3.3. Timer Block Diagram ............................................................. S-5
S4. Schematic Diagram .................................................................. S-6
S4.1. Interconnection Diagram ....................................................... S-6
S4.2. Audio Out Schematic Diagram .............................................. S-8
S4.3. FL (F) Schematic Diagram .................................................. S-12
S4.4. Power_P (P) Schematic Diagram ....................................... S-14
S4.5. Front Schematic Diagram ................................................... S-18
S4.6. Power SW Schematic Diagram ........................................... S-19
S4.7. Open SW Schematic Diagram ............................................ S-19
S5. Print Circuit Board .................................................................. S-20
S5.1. Audio Out P.C.B. ................................................................. S-20
S5.2. Power_P P.C.B. ................................................................... S-21
S5.2.1. Power_P P.C.B. (Component Side) ................................. S-21
S5.2.2. Power_P P.C.B. (Foil Side) .............................................. S-22
S5.3. Front P.C.B. ......................................................................... S-24
S5.4. Power SW P.C.B. ................................................................ S-28
S5.5. Open SW P.C.B. .................................................................. S-28
S6. Abbreviation ........................................................................... S-29
S7. Replacement Parts List ......................................................... S-33
S8. Exploded View ....................................................................... S-38
S8.1. Frame and Casing Section.................................................. S-38
S8.2. Mechanism Section ............................................................. S-39
S8.3. Packing Parts and Accessories Section .............................. S-40
Name of Signal
OFTR FEP
Circuit name being connected.
This signal is connected
to the FEP schematic diagram.
6.Use the parts number indicated on the Replacement Parts List .
7.Indication on Schematic diagrams:
5.The voltage being indicated here may be include observational-error (deviation) due to
internal-resistance and/or reactance of equipment. Therefore, handle the value
indicated on here as reference.
4.Although the voltage and waveform available on here is measured with standard frame,
it may be differ from actual measurement due to modification of circuit and so on.
3.The voltage being indicated on the schematic diagram is measured in
"Standard-Playback" mode when there is no specify mode is mentioned.
2.It is only the "Test Round" and no terminal (Pin) is available on the P.C.B.
when the TP (Test Point) indicated as " " mark.
1.Although reference number of the parts is indicated on the P.C.B. drawing and/or
schematic diagrams, it is NOT mounted on the P.C.B. when it is displayed with "$" mark.
COMPONENTS IDENTIFIED WITH THE MARK HAVE THE SPECIAL CHARACTERISTICS
FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS USE ONLY THE SAME TYPE.
Vol.1
(K)...........Black Type
Colour
Model No.
DMP-BD60P
DMP-BD60PC
DMP-BD601P
DMP-BD605P
DMP-BD80P
DMP-BD80PC
Blu-ray Disc Player
Table of contents
Service Manual
CHM0902005CE
Diagrams and Replacement
Parts List
S1. About Indication of The Schematic Diagram
S1.1. Important Safety Notice