Panasonic DMP-BD Series Service Manual Download Page 26 | Manualshive

Page: 26 / 72

background image

26

9.2.4.

Slide Cam

1. Perform the step “9.2.3. Pulley Gear, Belt”.
2. Remove the Sheet.
3. Disconnect the 3 FFCs.
4. Remove the 2 Screws (B) and the Angle.
5. Peel off Coppery Sheet from FFC (A) and remove the

Drive P.C.B.

Caution:

Though the Drive P.C.B. is not supplied as replace-
ment parts, it must be removed for after disassem-
bling.

6. Open the connector lock, and disconnect the FFC.
7. Remove the 2 Screws (C), and remove the Traverse

Base Ass’y with spreading the 2 hooks to the direction of
arrows.

8. Remove the Slide Cam.

9.2.5.

Mid Gear, Drive Gear and Loading
Motor

1. Perform the step “9.2.4. Slide Cam”.
2. Remove the Mid Gear and Drive Gear.
3. Remove the Screw (D) to remove the Loading Motor.

4. Remove the Screw (E), and remove the SW P.C.B. with

the Loading Motor.
Remove the 2 soldering points, and remove the Loading
Motor.

«
...
24
25
26
27
28
...
»

Summary of Contents for DMP-BD Series









































































Reviews:

No comments

Related manuals for DMP-BD Series

Brand: NEC Pages: 2

Brand: NEC Pages: 29

Brand: NAD Pages: 2

Brand: Impecca Pages: 23

Brand: Mystery Pages: 36

Brand: SanDisk Pages: 24

Brand: DSPPA Pages: 13

Brand: Marantz Pages: 28

Brand: Tascam Pages: 28

Brand: Leona Pages: 14

Brand: Goldmund Pages: 13

Brand: Fiio Pages: 4

Brand: F&U Pages: 16

Brand: Craig Pages: 27

Freedom ReAct Interactive

Brand: MTI Pages: 30

Brand: Kraun Pages: 42

Brand: Craig Pages: 21

Brand: GE Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands