94
VQT2X62
VQT2X62
95
Using with your PC
Some computers can read directly
from the camera’s memory card.
For details, see the manual for your
computer.
Using the [PLAYBACK] menu
(Continued)
Playback Mode:
■
To cancel connection
Click
‘Safely Remove Hardware’
in the Windows System Tray
→
disconnect USB
connection cable
→
turn off camera power
→
disconnect AC adaptor
Turn on power of both
camera and computer
Connect camera to
computer
• Please make sure you use the
supplied USB connection cable.
Use of cables other than the
supplied USB connection cable
may cause malfunction.
Select [PC] on the camera
A message may be displayed on screen
if [USB MODE] (
→
39) is set to [PictBridge
(PTP)]. Select [CANCEL] to close the
screen, and set [USB MODE] to [PC].
Operate with your computer
Check socket direction and insert straight in.
(Damage to socket shape can lead to faulty
operation.)
[ACCESS] (sending data)
• Do not disconnect the
USB connection cable
while [ACCESS] is
displayed.
USB connection cable
(always use cable
supplied)
If using AC adaptor,
turn off the camera
before plugging in or
removing.
Hold here
(Push until it is fully
inserted.)
Pictures and motion pictures can be imported from the camera to your computer by
connecting the two together.
• If your computer does not support SDXC Memory Cards, a message will be displayed
requesting you to format the card. (Do not format the card. This will erase recorded
pictures.) If the card is not recognised, refer to the following support website:
http://panasonic.net/avc/sdcard/information/SDXC.html
• Imported pictures can then be printed or sent by e-mail using the ‘PHOTOfunSTUDIO’
software on the CD-ROM (supplied).
Getting Ready:
• Use a fully charged battery or connect an AC adaptor (optional).
• When importing pictures from the built-in memory, remove any memory cards.
[COPY]
You can copy pictures between built-in memory and memory card.
Set-up: Press [MENU/SET]
→
[PLAYBACK] menu
→
Select [COPY]
Select the copy method (direction)
: Copy all pictures from built-in memory to card
(go to step )
: Copy 1 picture at a time from card to built-in
memory.
When selecting
, press
◄►
to select a picture, and then
press [MENU/SET]
Select [YES]
• To cancel
→
Press [MENU/SET]
• After confirmation, press to return to the menu
screen.
(Screen shown is example)
●
If there is not enough space on the built-in memory for copying to be performed, turn off
the power, remove the card, and delete pictures from the built-in memory.
●
Copying of picture data from the built-in memory to memory cards will be terminated
midway if there is insufficient space on the card. Using memory cards with higher
capacities than the built-in memory (approx. 40 MB) is recommended.
●
Copying pictures may take several minutes. Do not turn off power or perform other
operations during copying.
●
If identical names (folder/file numbers) are present in the copy destination, a new
folder for copying will be created when copying from built-in memory to card (
).
Identically-named files will not be copied from card to built-in memory (
).
●
The following settings will not be copied. Set them again after copying.
[FAVORITE], [PRINT SET], [PROTECT]
●
Only pictures from Panasonic digital cameras (LUMIX) may be copied.
●
Original pictures will not be deleted after copying (to delete pictures (
→
51)).