Panasonic DMCFZ7 - DIGITAL STILL CAMERA Operating Instructions Manual Download

Page: 18 / 132

Preparation

VQT0V63

∫

Removing the hood adaptor

• Hold the edge of the hood adaptor to

remove it.

∫

Temporarily storing the lens hood

Loosen the screw and remove the
lens hood.

Reverse the lens hood.

Attach the lens hood with the
screw facing upwards and then
tighten the screw again.

• Make sure the screw is loose and then

attach the lens hood.

• Do not tighten the screw too much.

Attach the lens cap.

• Ensure that the lens cap is firmly

attached.

• Do not take a picture while the lens

hood is temporarily stored.

• When taking pictures with flash with the

lens hood attached, the lower portion of
the photo may turn dark (vignetting effect)
and the control of the flash may be
disabled because the photo flash may be
obscured by the lens hood. We
recommend detaching the lens hood.

• When using the AF assist lamp in the

dark, detach the lens hood.

• For details on how to attach the MC

protector and the ND filter, refer to P105.

• You cannot attach the conversion lenses

or filters and the close-up lens when the
hood adaptor is attached.

Summary of Contents for DMCFZ7 - DIGITAL STILL CAMERA





































































































































Search results

Summary of Contents for DMCFZ7 - DIGITAL STILL CAMERA

Reviews:

Related manuals for DMCFZ7 - DIGITAL STILL CAMERA

Brands by name

Popular brands

Panasonic DMCFZ7 - DIGITAL STILL CAMERA, Operating Instructions Manual

Search results

Summary of Contents for DMCFZ7 - DIGITAL STILL CAMERA

Reviews:

Related manuals for DMCFZ7 - DIGITAL STILL CAMERA

Brands by name

Popular brands