Advanced
47
VQT0V40
Optical Image
Stabilizer
This mode detects jitter and compensates
for it.
1
Press and hold the optical image
stabilizer button
A
until
[STABILIZER] appears.
2
Press
3
/
4
to select the
stabilizer function mode and then
press [MENU/SET].
∫
Demonstration of the optical image
stabilizer (Demonstration Mode)
Press
1
to display the demonstration. After
the demonstration ends, the screen returns
to the stabilizer function mode selection
menu. Press
1
again if you want to exit the
demonstration before it ends. While the
demonstration is displayed, the optical
zoom is fixed to Wide (1
k
) and the zoom
function cannot be activated. You also
cannot take pictures.
• The stabilizer function may not be
effective in the following cases.
– When there is a lot of jitter.
– When the zoom magnification is high.
– In digital zoom range.
– When taking pictures while following a
moving subject.
– When the shutter speed becomes
slower to take pictures indoors or in dark
places.
Be careful of camera jitter when you press
the shutter button.
• The setting is fixed to [MODE1] in simple
mode [
], [MODE2] in
[SELF PORTRAIT] (P53) in scene mode
and [OFF] in [STARRY SKY] (P55) in
scene mode. The stabilizer function mode
selection menu does not appear.
• In motion picture mode [
], [MODE2]
cannot be set.
MODE1
(
)
The stabilizer operates
continuously and can assist
during photo composition.
MODE2
(
)
The jitter is compensated for
when the shutter button is
pressed. There is a greater
stabilizing effect.
OFF
(
)
When you want to take a picture
with jitter.
SCN
1
SCN
2
STABILIZER
OFF
MODE2
DEMO.
SELECT
SET
MENU
MENU
SET
MODE1
VQT0V40ENG.book 47 ページ ２００６年２月２７日 月曜日 午後１時１９分
