Advanced (Recording pictures)
42
VQT1C39
Taking Pictures with
the Self-timer
1
Press
2
[
].
2
Press
3
/
4
to select a mode.
• You can also press
2
[
] to select.
3
Press [MENU/SET].
• You can also press the shutter
button halfway to finish.
• The menu screen disappears after
about 5 seconds. At this time, the
selected item is automatically set.
4
Press the shutter button halfway
to focus and then press it fully to
take the picture.
•
A
: Press the shutter button halfway to
focus.
•
B
: Press the shutter button fully to take
the picture.
• The self-timer indicator
C
blinks and
the shutter is activated after 10 seconds
(or 2 seconds).
• If you press [MENU/SET] while the
self-timer is set, the self-timer setting is
canceled.
• When using a tripod etc., setting the
self-timer to 2 seconds is a convenient
way to avoid the jitter caused by pressing
the shutter button.
• When you press the shutter button once
fully, the subject is automatically focused
just before recording. In dark places, the
self-timer indicator will blink and then may
turn on brightly operating as an AF assist
lamp (P66) to allow the camera to focus
on the subject.
• In simple mode [
], the self-timer is fixed
to 10 seconds.
• When you set the self-timer in burst mode,
the camera starts taking a picture 2 or
10 seconds after the shutter button is
pressed. The number of pictures taken at
one time is fixed to 3.
• We recommend using a tripod when
recording with the self-timer.
OFF
SET
SELECT
MENU
2 SEC.
10 SEC.
SELFTIMER
CANCEL
3
MENU
VQT1C39ENG.book 42 ページ ２００６年１２月２１日 木曜日 午前１０時５７分
