Recording
- 88 -
∫
Changing the settings for [
/
SETTINGS], [STEP] and [SEQUENCE] in Auto
Bracket
1
Select [AUTO BRACKET] in the [REC] Mode menu.
(P62)
2
Press
3
/
4
to select [
/
SETTINGS], [STEP] or
[SEQUENCE] and then press [MENU/SET].
3
Press
3
/
4
to select the setting and then press [MENU/SET].
•
You can take one picture at a time when set to [
].
•
You can continuously take pictures up to set numbers when set to [
].
•
Exit the menu after it is set.
Note
•
When taking pictures using Auto Bracket after setting the Exposure Compensation range, the
pictures taken are based on the selected Exposure Compensation range.
•
The exposure may be compensated incorrectly, depending on the brightness of the subject.
•
When taking pictures continuously using Auto Bracket with [I.RESOLUTION] set to
[EXTENDED], it may take time to record all the set number of pictures.
•
Auto Bracket is disabled in the following cases.
–
[MINIATURE EFFECT] in Creative Control Mode
–
When White Balance Bracket is set.
–
When recording motion pictures
–
When recording using the flash
Item
Settings
Item
Settings
[
/
SETTINGS]
[
] (single)
[SEQUENCE]
[0/
`
/
_
]
[
] (burst)
[
`
/0/
_
]
[STEP]
[3•1/3] (3 pictures)
[3•2/3] (3 pictures)
[3•1] (3 pictures)
[5•1/3] (5 pictures)
[5•2/3] (5 pictures)
[5•1] (5 pictures)
[7•1/3] (7 pictures)
[7•2/3] (7 pictures)
[7•1] (7 pictures)
