Others
- 212 -
[MEMORY CARD PARAMETER ERROR]/[THIS MEMORY CARD CANNOT BE USED]
>
Use a card compatible with this unit.
(P24)
•
SD Memory Card (8 MB to 2 GB)
•
SDHC Memory Card (4 GB to 32 GB)
•
SDXC Memory Card (48 GB, 64 GB)
[INSERT SD CARD AGAIN]/[TRY ANOTHER CARD]
•
An error has occurred accessing the card.
>
Insert the card again.
>
Insert a different card.
[READ ERROR/WRITE ERROR
PLEASE CHECK THE CARD]
•
It has failed to read or write data.
>
Remove the card after turning the power [OFF]. Insert the card again, turn the power on,
and try to read or write the data again.
•
The card may be broken.
>
Insert a different card.
[CANNOT RECORD DUE TO INCOMPATIBLE FORMAT (NTSC/PAL) DATA ON THIS
CARD.]
>
If you want to delete some pictures, format the card after saving necessary data on a PC
etc.
(P73)
>
Insert a different card.
[MOTION RECORDING WAS CANCELLED DUE TO THE LIMITATION OF THE
WRITING SPEED OF THE CARD]
•
Use a card with SD Speed Class with “Class 4” or higher when recording motion pictures.
•
In the event that it stops even after using a “Class 4” card or higher, the data writing speed has
deteriorated so it is recommended to make a backup and then format
(P73)
.
•
Depending on the type of the card, motion picture recording may stop in the middle.
[A FOLDER CANNOT BE CREATED]
•
A folder cannot be created because there are no remaining folder numbers that can be used.
>
Format the card after saving necessary data on a PC etc.
(P73)
If you execute
[NO.RESET] in the [SETUP] menu after formatting, the folder number is reset to 100.
(P73)
