
- 47 -
Basic
∫
Operations performed during Motion Picture Playback
1
Display control panel by touching screen.
•
If no operation is performed for 2 seconds, it will return to original status.
2
Operate control panel by touching.
•
About fast forward/rewind playback
–
Touch [
] during playback to fast forward (touch [
] to fast rewind). The fast forward/
rewind speed increases if you touch [
]/[
] again. (The display on the screen changes
from [
5
] to [
].)
–
Touch [
] to resume normal playback speed.
–
When using a high capacity card, it is possible that fast rewinding may be slower than usual.
Note
•
Sound can be heard through the speaker. Refer to [VOLUME]
(P60)
for information about how
to adjust the volume in the [SETUP] menu.
•
To play back the motion pictures recorded by this unit on a PC, use the “QuickTime” or the
“PHOTOfunSTUDIO 6.0 HD Edition” software on the CD-ROM (supplied).
•
QuickTime Motion JPEG motion pictures that were recorded with a PC or other equipment may
have lower image quality or may not be able to play back with this unit.
C
Fast rewind, Frame-by-frame rewind
¢
2
D
Play/Pause
E
Fast forward, Frame-by-frame forward
¢
2
F
Stop
G
Reduce volume level
¢
1
H
Increase volume level
¢
1
¢
1 You can also adjust the volume level by using
the rear dial.
¢
2 These operations can be performed only in the
Pause Mode and the following icons are
displayed.
–
Frame-by-frame forward: [
]
–
Frame-by-frame rewind: [
]