Others
127
VQT1B25
7: The recorded picture looks rough.
Noise appears on the picture.
• Is the ISO sensitivity high or the shutter
speed slow?
(ISO sensitivity is set to [AUTO] when
the camera is shipped. Therefore, when
taking pictures indoors etc. the ISO
sensitivity increases.)
– Decrease the ISO sensitivity. (P79)
– Set [NOISE REDUCTION] in
[PICT.ADJ.] to [HIGH] or set every
item except [NOISE REDUCTION] to
[LOW]. (P86)
– Take pictures in bright places.
• In [HIGH SENS.] (P67) in scene mode,
the resolution of the recorded picture
decreases slightly because of high
sensitivity processing.
This is not a malfunction.
8: The brightness or the hue of the
recorded picture is different from the
actual scene.
• If recording under fluorescent light, the
brightness or the hue may change
slightly when the shutter speed
becomes fast. This occurs due to the
characteristics of fluorescent light. It is
not a malfunction.
9: A reddish vertical line appears on the
LCD monitor when the shutter button
is pressed halfway or when recording
motion pictures.
• This is a phenomenon
called smear. It is a
characteristic of CCD
and appears when the
subject has a bright
part. Black or green
vertical lines may also appear or
uneven colors may appear around the
smear. This is not a malfunction. It is
recorded in motion pictures but is not
recorded on still pictures.
10: Motion picture recording stops in
the middle.
• Are you using a MultiMediaCard?
– This unit does not support
MultiMediaCards.
• When you set the picture quality to
[30fpsVGA] or [30fps16:9], we
recommend using a High Speed SD
Memory Card with “10MB/s” or greater
displayed on the package.
• Depending on the type of the card,
recording may stop in the middle.
11: When the shutter button is pressed
halfway, the image becomes a still
image for that instant.
• Is 3-area focusing (High speed) or
1-area focusing (High speed) selected
as the AF mode? (P83)
12: The zoom does not move.
• Is [CONVERSION] set to [
] or [
]?
(P88)
∫
LCD monitor/Viewfinder
1: The LCD monitor/Viewfinder becomes
darker or brighter for a moment.
• This phenomenon appears when you
press the shutter button halfway to set
the aperture value and does not affect
the recorded pictures.
2: The LCD monitor flickers indoors.
• The LCD monitor may flicker for a few
seconds after turning the camera on
indoors under fluorescent light.
This is not a malfunction.
3: The LCD monitor/Viewfinder is too
bright or dark.
• Adjust the brightness of the screen. (P23)
• Is the power LCD function or high angle
mode activated?
4: The picture is not displayed on the
LCD monitor.
• Does the picture appear on the
Viewfinder?
– Press the [EVF/LCD] button to switch
to LCD monitor display.
DMC-FZ8_PP ENG.book 127 ページ ２００６年１２月２６日 火曜日 午後４時２０分
Summary of Contents for DMC-FZ8S
Page 146: ...146 VQT1B25 MEMO ...
Page 147: ...147 VQT1B25 ...
