Panasonic DMC-FT5 Owner'S Manual Download Page 135

Page: 135 / 277

- 135 -

GPS/Sensor

Sensors (compass/altimeter/barometer) are
operated

Applicable modes:

The direction, altitude, and atmospheric pressure can be measured and recorded in the
recorded images.
•

If compass/altimeter/barometer are operated in the time settings

(P28)

at the time of purchase,

[Sensor Settings] will be set to [ON] automatically.

Select [Sensor Settings] on the [GPS/Sensor] menu, and then press

[MENU/SET].

Press

to select [ON], and then press

[MENU/SET].

•

Exit the menu after it is set.

•

To switch the environment information screen, press
[DISP.] several times.

Compass

Altimeter

Latitude

Longitude

Time positioning was performed

Barometer

•

When [GPS Setting] is set to [OFF], the latitude/longitude and positioning timing are not displayed.

•

They keep working when this unit is turned off. If you do not wish the compass/altimeter/barometer
to keep working when this unit is turned off, set [Airplane Mode] to [ON].

(P53)

•

For motion pictures

, the direction, altitude and atmospheric pressure measured at the start of the

recording are recorded.

When recording using [MP4] or [FHD/60p/

]/[FHD/60i/

]/[HD/60p/

] in [AVCHD]

0ft

00' 00' 00.00

1013hPa

-24H

000' 00' 00.00

GPS

-5

-10

N
E

10:00 DEC.1.2013

10:00 DEC.1

Summary of Contents for DMC-FT5






















































































































































































































































































Search results

Summary of Contents for DMC-FT5

Reviews:

Brands by name

Popular brands

Panasonic DMC-FT5, Owner'S Manual

Search results

Summary of Contents for DMC-FT5

Reviews:

Brands by name

Popular brands