- 89 -
Advanced (Recording pictures)
∫
About focusing
When [CONTINUOUS AF]
(P122)
is set to [ON], and you focus on a subject, the camera
will maintains focus on that subject. To fix the focus position when beginning to record a
motion picture, set to [OFF].
Note
•
The screen will change as following when the motion picture button is pressed in steps
2
and
3
.
¢
1 Press [DISPLAY] to display the available recording time before recording motion pictures.
¢
2 The screen that is displayed during Motion Picture Mode setting is different depending on the
setting of the
[REC MODE]
.
Start recording by pressing the motion
picture button.
A
Available recording time
B
Elapsed recording time
•
Release the motion picture button right after you press
it.
•
The audio is also recorded simultaneously from the
built-in microphone on this unit. (Motion pictures
cannot be recorded without audio.)
•
The recording state indicator (red)
C
will flash while
recording motion pictures.
•
The screen will become dark momentarily, and
recording will start after adjusting the display.
Stop the recording by pressing the motion picture button again.
•
Sound will go off when pressing the motion picture button indicating start/stop of motion
picture recording.
Sound volume can be set in [BEEP LEVEL]
(P36)
.
•
If the built-in memory or the card becomes full in the middle of recording, the camera
stops recording automatically.
A
Still picture recording
screen
¢
1
B
Motion picture mode
setting
¢
2
C
Motion picture
recording screen
D
Still picture mode
setting
B
A
C
R1m21s
R1m21s
R1m21s
3
s
3
s
DMC-FT2PDF_EB.book 89 ページ ２０１０年２月１日 月曜日 午後６時８分
