83
VQT1M59
Connecting to other equipment
Connecting to other equipment
Connecting to a PC
You can acquire recorded pictures to a PC by connecting the camera and the PC.
•
You can easily print out or mail the pictures you have imported. Use of the
“
PHOTOfunSTUDIO-viewer-
”
bundled software on the CD-ROM (supplied) is a convenient
way of doing this.
Preparations:
Turn on the camera and the PC.
Remove the card before using the pictures in the built-in memory.
Connect the camera to a PC via the USB connection cable
A
(supplied).
A
USB connection cable (supplied)
•
Check the directions of the connectors, and plug them straight in or unplug them straight out.
(Otherwise the connectors may be bent out of shape which will cause trouble.)
B
Align the marks, and insert.
C
AC adaptor (DMW-AC5PP; optional)
•
Use a battery with sufficient battery power or the AC adaptor (DMW-AC5PP; optional). If the
remaining battery power becomes low while the camera and the PC are communicating, the
status indicator blinks and the alarm beeps.
Refer to
“
Disconnecting the USB connection cable safely
”
(P84) before disconnecting the USB
connection cable. Otherwise, data may be destroyed.
Move
3
/
4
to select [PC], and then press [MENU/
SET].
•
If [USB MODE] (P24) is set to [PC] in the [SETUP] menu in
advance, the camera will be automatically connected to the PC
without displaying the [USB MODE] selection screen. Since there
is no need to set this each time you connect to the PC, it is
convenient.
•
When the camera has been connected to the PC with
[USB MODE] set to [PictBridge(PTP)], a message may appear
on the PC’s screen. Select [Cancel] to close the screen, and
disconnect the camera from the PC. Then set [USB MODE] to
[PC] again.
1
DIGITAL
AV OUT
DC IN
A
C
B
2
USB MODE
SELECT
SET
PLEASE SELECT
THE USB MODE
PictBridge(PTP)
PC
MENU
VQT1M59_ENG.book 83 ページ ２００８年１月８日 火曜日 午後５時２１分
