VQT1M59
100
Others
•
The LCD monitor turns off and the status indicator lights when [AUTO LCD OFF] (P23) is
selected for the [ECONOMY] mode.
[This does not happen when using the AC adaptor (DMW-AC5PP; optional).]
If the remaining battery power is low, it may take longer for the flash to be charged, and the time
during which the LCD monitor is turned off may become longer.
•
This phenomenon appears when you press the shutter button halfway to set the aperture value
and does not affect the recorded pictures.
•
The LCD monitor may flicker for a few seconds after turning the camera on indoors under
fluorescent light. This is not a malfunction.
>
Adjust the brightness of the screen. (P21)
•
[POWER LCD] or [HIGH ANGLE] is activated
. (P22)
•
This is not a malfunction.
These pixels do not affect the recorded pictures.
•
In dark places, noise may appear to maintain the brightness of the LCD monitor. This does not
affect the pictures you are recording.
•
Is the flash setting set to [
Œ
]?
>
Change the flash setting. (P39)
•
Flash mode is not available when auto bracket (P46) or [BURST] (P64) in [REC] mode menu has been set.
•
The flash is activated twice when red-eye reduction (P40) has been set.
•
[ROTATE DISP.] (P78) is set to [ON].
•
You can rotate pictures with the [ROTATE] function. (P78)
LCD monitor
The LCD monitor turns off although the camera is turned on.
The LCD monitor becomes darker or brighter for a moment.
The LCD monitor flickers indoors.
The LCD monitor is too bright or dark.
Black, red, blue and green dots appear on the LCD monitor.
Noise appears on the LCD monitor.
Flash
The flash is not activated.
The flash is activated 2 times.
Playback
The picture being played back is rotated and displayed in an unexpected direction.
VQT1M59_ENG.book 100 ページ ２００８年１月８日 火曜日 午後５時２１分
