
13
Inserting the Battery
[Preparation]
• Set the power switch to [OFF].
1
Slide the lock lever.
2
Open the battery door and the inside
door.
3
Insert the battery while pressing the
inside door.
•
Insert the battery with the arrow part
upward and terminal part downward.
4
Close the battery door.
5
Lock lever on battery door.
• When the camera will not be used for a
long time, remove the battery.
(When inserting the battery again, set the
date again)
• Before removing the battery from the
camera, turn the camera off.
• The supplied battery is for exclusive use
with this camera. Do not use it except
with this camera.
• When turning the camera on, do not put
in/out the DC input lead, the data stored
in the card could be destroyed. And the
file number is not memorized, so the
picture with same file number is recorded
in the another card.
CAUTION
Danger of explosion if battery is incorrectly
replaced.
Replace only with the same or equivalent
type recommended by the manufacturer.
Dispose of used batteries according to the
manufacturer’s instructions.
3
2
1
4
KC4‑PP.book 13 ページ 2002年1月21日 月曜日 午後7時51分
Summary of Contents for DMC-F7PP
Page 87: ...87 Memo...