Basic
- 28 -
Recording 3D motion pictures
•
3D motion pictures recorded with this unit are in side-by-side (2 screen structure) format. The
image quality is fixed at 1920
k
1080 pixels. Because the 3D motion pictures are in side-by-side
format, the image quality of the recorded 3D motion picture differs from that of high definition
images.
•
The following functions are activated automatically.
–
[Auto] in [Sensitivity]/Auto White Balance/[Continuous AF]/[Stabilizer]
•
To achieve good a 3D effect, we recommend that you record with the distance to the subject set
as follows. Outside this range, left-right distortion increases and may prevent the 3D effect
being achieved at the edges of the image.
–
Approx. 90 cm (2.96 feet) (Wide)/Approx. 3.4 m (11.2 feet) (Tele) to
¶
Set the 3D/2D switch to [3D].
Start recording by pressing the motion
picture button.
A
Available recording time
B
Elapsed recording time
•
Release the motion picture button right after you press it.
•
The recording state indicator (red)
C
will flash while
recording motion pictures.
•
Be careful not to get too close to the subject.
•
Make sure that your fingers are not over either of the
lenses.
Stop the recording by pressing the motion
picture button again.
Pay attention to the following points when 3D video recording.
•
Where possible, record with the unit in a horizontal state.
•
Be careful not to get too close to the subject.
•
When moving the unit as you record, move it slowly.
•
Try to hold the unit as steady as possible when recording while riding in a vehicle or walking.
B
C
A
DMC-3D1PDF-VQT3U43_mst.book 28 ページ ２０１１年１０月２４日 月曜日 午後１時９分