- 161 -
Others
In the following cases, there is no problem with the camera, so do not worry.
•
There is a rattling sound when the camera is shaken while the power is off or during Playback
Mode. (Sound of lens moving)
•
There is a rattling sound etc., when the power is turned on or off, or when switching from
Recording Mode to Playback Mode. (Sound of the aperture)
•
When you hear a clicking or snapping sound from the lens while taking pictures. (The sound of
the aperture adjusting to changes in light levels)
When this occurs, the image on the LCD monitor may appear to change dramatically. However,
the picture is not affected.
>
Touch [
], select the [Setup] menu icon [
]. Then select [
~
] to set the desired
language.
(P59)
•
In dark places, the AF Assist Lamp lights red to make it easier to focus on a subject.
•
Is [AF Assist Lamp] on the [Rec] Mode menu set to [On]?
(P104)
•
The AF Assist Lamp does not turn on in bright places.
•
The surface of the camera may become warm during use. This does not affect the performance
or quality of the camera.
•
When the brightness changes due to zoom or camera movement etc., the lens may click and
the picture on the screen may drastically change. However, the picture is not affected. The
sound is caused by the automatic adjustment of the aperture. This is not a malfunction.
•
If you do not use the camera for a long time, the clock may be reset.
>
[Please set the clock] message will be displayed; please re-set the clock.
(P21)
•
When using the Extended Optical zoom or the Intelligent Zoom, the zooming action will stop
temporarily. This is not a malfunction.
Others
When shaking the camera, there is a rattling sound.
An unreadable language was selected by mistake.
A red lamp sometimes turns on when the shutter button is pressed halfway.
The AF Assist Lamp does not turn on.
The camera becomes warm.
The lens clicks.
The clock is reset.
Zooming stops instantaneously.
DMC-3D1PDF-VQT3U43_mst.book 161 ページ ２０１１年１０月２４日 月曜日 午後１時９分