3
Cautions Before Installation
Pr
epa
ra
tion
Required Tools
Tape measure
Phillips screwdriver
Adjustable wrench
Bucket and rag
As the product has undergone the water passage test, a small amount of water remaining inside may flow out.
This is not a malfunction.
The operating range of water pressure is 49 - 735 kPa
｛
0.5 - 7.5 kgf/cm
2
｝
.
Shaking may sometimes result from seat mounts not contacting with the surface of the toilet depending on
toilet types.
Tips
Note
Do not plug the power plug before the bidet body is installed completely. Otherwise, a malfunction may
be incurred.
When the water remaining inside the body is frozen, move the body to a warm place. Perform installation
after the frozen water is thawed out.
Make sure to use the supplied water inlet hose. Otherwise, a water leak may be incurred.
