Record mode
36
LSQT0862
Self-timer recording
You can record still pictures on a card using the
timer.
≥
Set to Card Recording Mode.
1
Set [BASIC] >> [SELF TIMER] >> [YES].
2
Press the [PHOTO SHOT] button.
≥
After the recording lamp and the [
]
indication flashes for approx. 10 seconds,
recording will start. After recording, the
self-timer will be canceled.
≥
You cannot press the [PHOTO SHOT] button
half way. Focusing will be carried out with
reference to the focusing frame.
ª
To stop the timer midway through
Press the [MENU] button.
≥
By operating the [OFF/ON] switch or mode dial,
the self-timer standby mode is canceled.
≥
If the RapidFire Consecutive Photoshot
recording is set, the maximum recordable
pictures are recorded.
Recording images for wide-screen
TVs
This allows you to record images compatible with
wide-screen TVs.
Wide Function
Images are recorded with a 16:9 aspect ratio.
Cinema Function
Images are recorded with a black belt appearing
along the top and bottom of the screen so that
they look like theatre movies.
≥
Set to Tape Recording Mode.
1
Wide Function
Set [ADVANCE] >> [WIDE] >> [ON].
Cinema Function
Set [ADVANCE] >> [CINEMA] >> [ON].
ª
To cancel the Wide/Cinema function
Wide Function
Set [ADVANCE] >> [WIDE] >> [OFF].
Cinema Function
Set [ADVANCE] >> [CINEMA] >> [OFF].
≥
When the Wide Function is activated, the
display such as the menu screen or the
operation icon is expanded horizontally.
≥
Images played back vary depending on the TV
connected. Please refer to the operating
instructions for your TV.
≥
This function does not widen the recording
range.
≥
When images are played back on a TV screen,
the date/time indication may be erased in some
cases.
≥
Depending on the TV, the picture quality may
deteriorate.
≥
When a cinema picture is imported onto a
personal computer, the imported picture may
not be displayed correctly, depending on the
software used.
≥
If you use a TV with an aspect ratio of 4:3, we
do not recommend using the wide mode.
(Images are vertically stretched.)
Optical image stabilizer function
On this model, [EIS] is used as the indication for
Optical Image Stabilizer.
Reduces the jitter caused by hand movement
when recording.
≥
Set to Tape Recording Mode.
1
Set [ADVANCE] >> [EIS] >> [ON].
ª
To cancel the image stabilizer function
Set [ADVANCE] >> [EIS] >> [OFF].
≥
When recording still pictures in the Card
Recording mode, pressing the [PHOTO SHOT]
button halfway increases the effect of the image
stabilizer function. (MEGA Optical image
stabilizer)
≥
When a tripod is used, we recommend that you
turn the image stabilizer function off.
≥
In the following cases, the image stabilizer
function may not work effectively.
≥
When the digital zoom is used
≥
When the Camcorder is shaken greatly
≥
When you record a moving subject while
tracking it
PHOTO
SHOT
CINEMA
EIS
LSQT0862ENG.book 36 ページ ２００４年１２月２１日 火曜日 午後５時９分
