manualshive.com logo in svg

Panasonic Digital Palmcorder MultiCam PV-DV203-K, Operating Instructions Manual

Share
Download
Panasonic Digital Palmcorder MultiCam PV-DV203-K Operating Instructions Manual Download Page 76

76

Palmcorder USB Device Driver/SD Drive

3

2

USB Terminal

USB Terminal

1

Turn on your PC.

2

Set the Palmcorder POWER to M-CARD.

3

Connect the Palmcorder to your PC (Windows)

 using the USB Cable (supplied).

• “CONNECT WITH PC” and “STORAGE” appears in the EVF or the LCD monitor.
• The “Found New Hardware Wizard” screen of Windows is displayed.

USB Cable (supplied)

For Windows XP users

Connection (for Palmcorder USB Device Driver/SD Drive)

Note

• When connecting for the first time using Windows XP, the OS installation CD may be

required.
Follow the instructions as they appear on your PC screen.

• For extended use, the AC Adaptor should be used as a power source.

Note

• For Palmcorder USB Device Driver/SD Drive, do not connect the i.LINK and USB

terminals to the Palmcorder at the same time.

DV203-K.p 76-78.p65

2003/06/11, 13:30

76

Summary of Contents for Digital Palmcorder MultiCam PV-DV203-K





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands