55
Notes for installation of Switch lever ass’y
• The Spring
is set to the projection of chassis and first,
is fitted and
is latched into the concave firmly.
9.2.9.
Opener and Opener roller
1. Procedure 1,2 “9.2.1. Disassembling of Traverse Base
Ass’y, Drive P.C.B. and SW P.C.B.” is performed in this
section.
2. The Opener is slide in the arrow direction fully, and it has
sound and Opener is removed.
3. The Opener roller is removed while pushing Opener lever
to inside.
9.2.10.
Rail
1. Procedures 1-4 of “9.2.1. Disassembling of Traverse
Base Ass’y, Drive P.C.B. and SW P.C.B.” is performed in
this section.
2. The dotted line is extended to outside, and the Rail is
removed while pulling to the back (as well as other side).
Summary of Contents for DIGA DMR-XS350EB
