25
RQT8849
Notes
Up to 20 index signals can be searched in either direction.
If you overshoot in either direction, press the opposite button to
correct.
For correct operation, make recordings of at least 5 minutes to
ensure that index signals are not spaced too closely together.
VHS Index Search System (VISS)
The unit automatically records special index signals on a
tape every time a recording is started (via [
REC], or a
scheduled recording). The index search function makes
use of these index signals to help you fi nd the beginning
of a desired program
q
uickly and easily.
W
hile stopped or during normal play
or
.
–
Each press increases the number of skips.
–
Press [
STOP] to cancel the search.
S-VHS Quasi Playback (SQPB)
This unit can play tapes recorded in S-VHS.
Some picture noise may occur depending on the type
of tape used.
It is not possible to fully obtain the high resolution
S-VHS is capable of.
This unit cannot record in S-VHS.
Ad
v
anced Features
Notes
Only works if there is at least 5 seconds blank space at the end of
the program.
W
hen the tape reaches the end of the program, it will
automatically rewind to the beginning and play again.
Repeat Playback
During playback or while stopped
PLAY
Press and hold for about 5 or
more seconds.
– Repeat Playback goes on indefi nitely until you
cancel it.
– The “RPt” indication appears on the unit’s display.
–
Press [
STOP] to stop play.
Tips
To remove the noise from a paused picture:
Start slow play (
24), then adjust the tracking.
Manual Tracking
During playback
TRACKING/V-LOCK
CH
or
TRACKING/V-LOCK
CH
–
Repeat until the picture noise disappears.
To return to auto tracking:
TRACKING/V-LOCK
CH
(simultaneously).
The unit usually makes tracking adjustments
automatically, but you may need to do it manually if noise
appears on a tape recorded on other e
q
uipment.
Adjusting the playback picture
Adjust the vertical synchronization to stop the picture
from shaking while paused.
Vertical Locking Adjustment
Notes
This function may not work with some tapes.
You can also adjust vertical synchronization with [CH
,
] on the
main unit.
W
hile paused
TRACKING/V-LOCK
CH
or
TRACKING/V-LOCK
CH
– Repeat until the shaking stops.
To return to the standard position:
TRACKING/V-LOCK
CH
(simultaneously).
Notes
This function may not work with some tapes.
You can also adjust the tracking with [CH
,
] on the main unit.
M5821.indb 25
M5821.indb 25
2007/05/23 15:12:19
2007/05/23 15:12:19