22
VQT2J34
Timer Recording
What is F
TM
?
F is the functions that enable timer recordings to be controlled by the signal sent
from the broadcaster. “Guide Link”, “Series recording” (
>
33), and “Split Programme” are
available.
“
Guide Link
” – If you set a timer recording from the TV Guide, the recording’s start and stop
times can be controlled by the broadcaster, e.g. delayed start.
This is indicated by “Guide Link” in the Timer Recording screen in step
2
(
>
below).
“
Split Programme
” – If a programme is separated into 2 or more parts by some other
programmes e.g. news, this unit pauses recording during the gap.
This is indicated by “Split” in the Timer Recording screen in step
2
(
>
below).
When setting timer from the 1st split programme, other parts of the programme will be
automatically set and indicated by the timer mark on the TV Guide, but not shown on the
timer recording list.
If you set a timer recording from the TV Guide, the recording’s start and stop times are
controlled by the signal sent from the broadcaster. If the signal is not sent correctly,
the recording may lack the beginning or the ending part of the programmes.
In order to make the timer recording work successfully, we recommend you set the
start time earlier and the end time later by some minutes, up to a maximum of 10
minutes for Guide Link to function.
e.g. When you set the timer recording for a programme that will start at 10:00 and end
at 11:00, set “9:58” and “11:05” in step
3
(
>
below).
[HDD]
[RAM]
[-R]
[-RW‹V›]
[+R]
[+RW]
Preparation:
≥
Turn on the television and select the appropriate video input to suit the
connections to this unit.
≥
Turn on this unit.
≥
If recording to DVD, insert a disc that you use for recording (
>
15).
≥
[RAM]
If the disc is protected, release protection (
>
68).
≥
Confirm that the clock on the unit’s display is set to the correct time.
1
– The GUIDE Plus+ list appears.
2
3
,
4
,
2
,
1
to select the future programme,
then
“Guide Link”, “Split” and “Series” are displayed here.
– If “Selection Screen” appears, press [
3
,
4
] to select “Single Timer Rec.”, then
press [OK]. Refer to “Series recording” (
>
33) for “Series Timer Rec.”.
3
Confirm the programme
(start and end time) by TV
magazine, etc. and correct if
necessary using
3
,
4
,
2
,
1
then
– The settings are stored and the timer programme is on.
– The timer icon is displayed.
– “
F
” lights on the unit’s display to indicate timer recording standby has been
activated.
– Repeat steps
2
–
3
to programme other recordings.
– Press [
Í
] to turn the unit off.
≥
“Guide Link” will not be displayed and will not function under the following conditions.
– Timer programmes set manually (
>
29).
– Timer programmes set from the TV Guide are modified or start/stop time
changed by more than 10 minutes from original time.
(Series)
: Series recording (
>
33) is set.
(Split)
:
The programme is split in two or more parts by other programmes. This
unit pauses recording during the gap between the parts of the
programme.
OPTION
RETURN
SLOW SEARCH
DRIVE
SELECT
PAGE
CHAPTER
PROG/CHECK
EXIT
STATUS
SKIP
TV
STOP
PAUSE PLAY x1.3
DELETE
INPUT
SELECT
AV
VOL
CH
PAUSE LIVE TV
-10s
+60s
MANUAL SKIP
OK
OK
Tips
≥
To check programmes (
>
30)
≥
To cancel a timer recording
programming
1
Press [
3
,
4
,
2
,
1
] to select the
programme (the timer icon is
displayed) and press [OK].
2
While “Delete” is selected, press
[OK].
3
Press [
2
,
1
] to select “Yes” and
press [OK].
– The timer icon disappears.
≥
To record sound using LPCM (XP mode
only):
Set the “Audio Mode for XP Recording” to
“LPCM” in the Setup menu (
>
73)
Notes
≥
[RAM]
[-RW‹V›]
[+R]
[+RW]
To use a new disc,
formatting is necessary. (
>
26, 68)
≥
The GUIDE Plus+ list is not displayed
immediately after initial tuning is done.
≥
The GUIDE Plus+ system will not work if
the clock is not set correctly.
≥
If “NTSC” has been selected for “TV
System” (
>
74), the GUIDE Plus+ system
cannot be used.
≥
“FR” recording mode is not available when
the timer programme is controlled by
“Guide Link”.
≥
The receipt of the GUIDE Plus+ system
data is only possible via the aerial input of
this unit. The receipt of the TV Guide data
via externally connected satellite receivers
is not possible.
≥
If you set a timer recording that will overlap
with other timer recordings, the
“Overlapped Timer Recording” screen
appears to help you resolve the
overlapping.
Follow the on-screen instructions.
≥
Simultanious recording to HDD and DVD
is not possible.
OPTION
RETURN
SLOW SEARCH
DRIVE
SELECT
PAGE
CHAPTER
PROG/CHECK
EXIT
STATUS
SKIP
TV
STOP
PAUSE PLAY x1.3
DELETE
INPUT
SELECT
AV
VOL
CH
PAUSE LIVE TV
-10s
+60s
MANUAL SKIP
OK
OK
OK
Selection screen
TUE 14.10.08 12:54:00
RETURN
OK
View
Single Timer Rec
Series Timer Rec
Delete
The West Tonight
3 TV
News & Factual
TUE 14.10.08
18:00
18:30
Series Info
Timer
Recording
1:58 SP
DVD
30:24 SP
HDD
Remain
SUN 10/10/10 19:45:00
RETURN
OK
Start
20:30
Date
10/10 SUN
Mode
SP
STTL
OFF
HDD
DVD
HDD
Channel
2 BBC 2
Stop
22:30
Programme Name
Press OK to store the programme.
DELETE
All Channels : BBC 2
Holiday Programme
(Guide Link)
Number
--
0
9
AD
OFF
Landscape
TV Guide:
Sun 10/10/10
19:45
Sun 10th
All
Channels
TIMER REC
RETURN
Guide Change Display Mode
Page
Page
+24 hours
-24 hours
Prog. Type
All Types
Category
Time:
info
BBC 1
BBC 2
Channel 4
Channel 5
2
OPTION: Select Advert, etc.
Holiday Programme
2 BBC 2
y
Timer icon
OK
DMR-EX773EB_VQT2J34-B.book 22 ページ ２０１０年１月７日 木曜日 午後５時８分
