14
RQT9048
Recording Set Top Box Programs
Refer to “Important Notes for Recording” (
➔
17) and “Advanced Recording” (
➔
18, 19) for detailed information on
recording.
RAM
-R
-R DL
-RW(V)
+R
+R DL
+RW
Preparation:
Turn on the television and select the appropriate video input to suit the
connections to this unit (Example: AV input).
When using the set top box, make sure it is turned on.
RAM
If the disc is protected, release protection (
➔
40).
•
•
•
to turn the unit on.
“HELLO” appears on the unit’s display.
–
;
OPEN/CLOSE
to open the tray
(Button located on the upper front of the unit)
.
Insert a disc with enough remaining blank space and press
[
;
OPEN/CLOSE] again to close the tray.
–
3a
When the set top box is controlled with this unit:
to select desired channel.
or
3b
When the set top box is not controlled with this unit:
to select “IN1” or “IN2”.
Select a channel on the connected equipment.
–
to select the recording mode.
Recording mode should be determined by program length and
available time on the disc (
➔
18).
Recording mode
Remaining time
–
to start recording.
REC
Pausing Recording
Press [
h
PAUSE].
Press again to restart recording.
–
Stopping Recording
Press [
g
STOP].
3a
Tips
Icons such as “
RAM
” indicate usable
discs. Refer to pages 55 and 56.
•
Notes
-R
-R DL
-RW(V)
+R
+R DL
+RW
It takes about 30 seconds for the unit
to complete recording management
information after recording finishes.
You cannot change the channel or
recording mode during recording.
•
•
3b
