16
RQT7460
Reco
rd
in
g
Recording television programmes
Refer to the control reference on page 14.
[HDD]
[RAM]
[DVD-R]
The unit sets the best possible picture quality that fits the recording
within the remaining disc space.
e.g.,
Preparation
Select the channel to record.
1
While stopped
Press [FUNCTIONS].
2
Press [
3
,
4
,
2
,
1
] to select
“FLEXIBLE REC” and press [ENTER].
3
Press [
2
,
1
] to select “Hour” and
“Min.” and press [
3
,
4
] to set the
recording time.
≥
You cannot record more than 8 hours.
≥
You can also set the recording time with the numbered
buttons.
4
When you want to start recording
Press [
3
,
4
,
2
,
1
] to select “Start”
and press [ENTER].
≥
Recording starts.
≥
The recording mode becomes FR mode.
To exit the screen without recording
Press [RETURN].
To stop recording partway
Press [
∫
].
To show the remaining time
Press [STATUS].
[HDD]
[RAM]
[DVD-R]
Preparation
≥
Connect a video cassette recorder, decoder or satellite/digital
receiver, etc. to this unit’s input terminals.
≥
When recording bilingual programmes
[HDD]
[RAM]
When both M 1 and M 2 is selected on the connected equipment,
you can select the audio type in playback.
[DVD-R]
Select either M 1 or M 2 on the connected equipment. (You cannot
select the audio type in playback.)
≥
When the output signal from the external equipment is NTSC,
change the “TV System” to “NTSC” in the SETUP menu
(
➡
page 41).
≥
To reduce noise in input from external equipment, set “AV-in NR” to
“On” in the SETUP menu (
➡
page 37).
≥
Press [HDD] or [DVD] to select the recording drive.
e.g., Connecting other video equipment to the AV3 input
terminals
If the audio output of the other equipment is monaural, connect to L/
MONO.
§
The S-VIDEO terminal achieves a more vivid picture than the
VIDEO terminal.
1
While stopped
Press [INPUT SELECT] to select the
input channel for the equipment you
have connected.
e.g., If you have connected to AV3 input terminals, select “A3”.
2
Press [REC MODE] to select the
recording mode (XP, SP, LP or EP).
≥
Using Flexible Recording (
➡
left), you can save content of a
video cassette to 1 disc with the best possible quality of
recording without wasting disc space.
3
When recording from other video equipment
Start play on the other equipment.
When recording from decoder or satellite/digital receiver
Select the channel on the other
equipment.
4
Press [
¥
REC].
Recording starts.
To skip unwanted parts
Press [
;
] to pause recording. (Press again to restart recording.)
To stop recording
Press [
∫
].
Flexible Recording
Remain
45 minutes in
SP mode
60 minutes
Recorded
Perfectly fit!
Recording rate
between SP and LP
Programme to be recorded
FLEXIBLE REC
Start
Cancel
Recording in FR mode
Set rec. time
3 Hour 00 Min.
Maximum rec. time
3 Hour 00 Min.
SELECT
RETURN
ARD
L R
DVD-RAM
REC 59
Remaining
time
Recording from an external equipment
Almost all videos and DVD software on sale have been
treated to prevent illegal copying. Any software that has
been so treated cannot be recorded using this unit.
PULL OPEN
OPEN/CLOSE
REC
/x1.3
TIME SLIP
CH
AV3
S-VIDEO IN
VIDEO IN
AUDIO IN
R
L/MONO
TIME SLIP
DRIVE SELECT
HDD
DVD
L/MONO - AUDIO IN - R
VIDEO IN
S-VIDEO IN
Audio/Video cable
S-Video cable
§
Other video
equipment
Yellow White Red
This unit
16
