background image

OP

EN

CL

O

SE

FILTER
CLEANING

ELB Test

ELB Reset

Push Up

OFF

MAX

Pow

er Contr

ol

Main Switch

ELB

Off

Off

High

On

OP

EN

CL

O

SE

FILTER
CLEANING

ELB Test

ELB Reset

Push Up

OFF

MAX

Pow

er Contr

ol

Main Switch

ELB

Off

Off

High

On

- 3 -

Stop using the Unit when any abnormality/failure occurs and turn "OFF" the 

Miniature Circuit Breaker (MCB). (Risk of smoke/fire/electric shock/scalding)

 

• The ELB Reset Lever cannot be reset. Please refer to item no. 3. TEST OPERATION at page 11.

 

• Burnt odor or smoke is detected during operation.

 

• The Front Plate/Back Plate is deformed or abnormally hot.

 

• The outlet water temperature become extremely hot and cannot be controlled using the Power Control Knob.

Contact your authorized dealer immediately for maintenance/repair.

Example of 

abnormality/

failure

WARNING

CAUTION

BEFORE USING

•  Do not spray water to the Unit, nor 

  put wet towels on it to avoid from 

  coming into contact with any live 

  parts and such, in order to prevent 

  smoke emission, ignition, fire and 

  electric shock hazards.

•  Switch off the Miniature Circuit Breaker (MCB) before

  any service to avoid electric shock hazards.

• Pay attention to the shower temperature when 

  reducing the volume of water. 

 

The shower temperature will become very hot if the 

  water flow rate is too low.

•  When the shower is used by someone such as child, old 

  person, sick person and physically handicapped person, 

  the person responsible for their safety

  is kindly requested to pay attention 

  and check the shower temperature by 

  using hand from time to time.

•  In time of lightning / thunder, switch “OFF” the 

 Miniature Circuit Breaker (MCB) in advance to protect 

  the shower Unit against possible damage.
•  Inspect on the built-in ELB (once a month) to avoid a 

  hazard to users such as damage to property, serious 

  injury or death. Please refer to item no. 3. TEST 

  OPERATION at page 11.

• 

The Unit must be earthed.

 

Improper grounding could cause electric shock.

• Do not insert finger or other objects into the electric 

  home shower Unit to avoid physical and electric 

  shock hazards.

•  If the ELB Reset Lever cannot be reset even if you push it

  up or if it soon slides down during operation, please do

  not use the Unit and contact the authorized dealer

  immediately to avoid a hazard to users such as damage

  to property, serious injury or death. Never fix the ELB

  Reset Lever forcibly with tape and such. 

• Do not replace the Shower Head, Shower Hose or any 

  other parts of the Unit with spare parts other than 

  genuine parts.

  Parts for other models will not

  fit to this model and may cause 

  hazardous condition to user. 

Shower Hose

Shower Head

THINNER

• Never use benzene, thinner, bleaching  

  agent and such for cleaning purpose to 

  avoid smoke emission, ignition, fire and 

  electric shock hazards.

• Please make sure the O Ring is  

  not removed and shall be free  

  from foreign particle to avoid  

  water leaking. 

• Avoid using dirty water as it may affect heater 

  performance and other components.

•  This appliance is not intended for use by persons 

  (including children) with reduced physical, sensory or 

  mental capabilities, or lack of experience and knowledge, 

  unless they have been given supervision or instruction 

  concerning use of the appliance by a person responsible 

  for their safety. Children should be supervised to ensure 

  that they do not play with the appliance. 

•  In order to avoid a hazard due to inadvertent resetting 

  of the thermal cut-out, this appliance must not be 

  supplied through an external switching device, such as 

  a timer, or connected to a circuit that is regularly 

  switched on and off by the utility.

Filter Unit

O P

E

N

C L O

S

E

FILTER

CLEANING

O Ring

• Do not block the Shower Head with 

  hand, towel or bend the Shower 

  Hose. The water flow rate will drop 

  and water temperature may become 

  very hot.
• Take care not to damage the  

  holes of the Shower Plate during  

  the cleaning. The Rubber Packing  

  shall be set on the Shower Head  

  before fixing back the Shower  

  Plate to Shower Head. Do not  

  remove part other than Shower 

  Plate and Rubber Packing.

Rubber 

Packing

Shower

Head

Shower 

Plate

•  Each time shower water is turned ‘ON’, check the water 

  temperature by hand before showering.

Summary of Contents for DH-3PL1PH













Reviews: