manualshive.com logo in svg

Panasonic DBS Series, Overview, Page: 26 / 31

Share
Download
Panasonic DBS Series Overview Download Page 26

Panasonic Digital Business System - Overview

April 1997

Issue 6

26

The CPC-EX Card

The CPC-EX card is an expanded and enhanced CPU card for the DBS. It replaces the CPC-
B and CPC-C cards, combining the facilities of both and providing new facilities to further
enhance the functionality of the DBS.

The CPC-EX can be fitted to any existing DBS system, directly replacing the CPC-B or -C
card installed. The memory can be RAM transferred between CPC-B v3.2 or later and CPC-
EX but not from CPC-C to CPC-EX, so full programming details must be recorded before
upgrading a card where a manual system reprogram is required.

In conjunction with the CPC-EX there is a new range of handsets, which can directly replace
the current range and offer expanded features over the previous models. The new handsets
will only operate with the CPC-EX or later software, earlier handsets will still operate with
CPC-EX.

The following new features are available with the CPC-EX.

⇒

 DC5/AC15A & ISDN features on a single CPC card

⇒

 Incoming ringing priority for internal or external calls

⇒

 Internal call queuing at the operator

⇒

 Call forward to an external number

⇒

 Trunk to trunk transfer

⇒

 Trunk to trunk conference

⇒

 DISA break out

⇒

 Expanded hunt groups to 24 groups of 32 extensions

⇒

 Internal call cyclic hunting mode

⇒

 Internal call ringing hunting mode

⇒

 Support for 4 BLF DSS units

⇒

 ISDN CLI lookup using SSD names

⇒

 Support for new DBS handset range

The new handsets offer the following in addition to the current range.

⇒

 Live keypad

⇒

 Volume control for

Incoming internal call ringing
Incoming external call ringing
Internal call monitor
External call monitor

⇒

 Off hook monitor

⇒

 Handset mute

⇒

 Large LED for ringing and message indication

⇒

 LINE key

⇒

 MIC key now an FF key function

The new extension model numbers are listed below in the section 

‘Proprietary Key

Telephones’

.

Summary of Contents for DBS Series
































Reviews:

No comments