DBS-92-570
Issued April 2000
9
Section 570 - TAPI Installation Guide
If the test dialer works...
If the test call works properly, then the TAPI adapter and Panasonic Service
Provider software are installed correctly and your Windows Telephony settings are
configured correctly.
• If you are experiencing difficulties with your TAPI application, but the test
dialer works okay, you may need to modify configuration parameters in the
TAPI application. Refer to the documentation accompanying the application
for the appropriate information.
If the test dialer does not work...
If the test call does not dial and connect properly, check the following settings in
your Windows Telephony Control Panel:
• the Panasonic Command Set Telephony SP is selected as the Telephony
Driver.
• your extension is specified as the Line and the correct Com port is selected.
• the Location (Windows 3.1) or Dialing Properties (Windows 95) parameters
are correct.
If necessary, refer to page 6, “Configuring the Telephony driver and dialing
options”, for the appropriate information.
