11/15
*This installation is omitted at the second and all subsequent connections.
However, for PCs with multiple USB ports, this recognition/setting change window may appear
again if you insert the USB cable into another USB port and switch the power on. If this
happens, install using the same procedure.
*The connecting Wizard may appear this time or every time, depending on the Wizard. In any
case, please follow the same procedure.
7) Completing the Found New Hardware Wizard is displayed in the Found New Hardware
Wizard, and the install is complete.
1) If the image display software is running on the PC, stop the display, and
close the image display program.
2) Disconnect the 3D image sensor power supply and the USB.
8.2 Shutdown Procedure
* Turn OFF the power supply of the 3D image sensor while the PC power is still on.
