Panasonic CZ-RTC5B Operating Instructions Manual Download Page 58

Page: 58 / 60

(EN)

The remote

controller screen

displays a flashing

“

”.

Faulty sensor or incorrect installation.

→

Turn OFF the ECONAVI function with the

remote controller and contact the retailer or

point of purchase with the Model No. and

problem.

The remote

controller screen

does not display the

The indoor unit has stopped. Turn on the

indoor unit.

The unit is in Fan mode. The ECONAVI

function does not operate in Fan mode.

The ECONAVI function is set to OFF. Turn

the ECONAVI function ON with the remote

controller.

The indoor unit may not support the

ECONAVI function. If you turn the

ECONAVI function ON with the remote

control but there is no change, the indoor

unit does not support the ECONAVI

function.

Please contact the dealer.

The remote controller

screen displays

“

”.

nanoe™ X is considered abnormal.

→

Turn OFF the nanoe™ X function with the

remote controller and contact the retailer or

point of purchase with the Model No. and

problem.

• If you need to contact for servicing, check the back cover of the operating instructions for indoor

units or outdoor units.

Troubleshooting

Summary of Contents for CZ-RTC5B





























































Search results

Summary of Contents for CZ-RTC5B

Reviews:

Related manuals for CZ-RTC5B

Brands by name

Popular brands

Panasonic CZ-RTC5B, Operating Instructions Manual

Search results

Summary of Contents for CZ-RTC5B

Reviews:

Related manuals for CZ-RTC5B

Brands by name

Popular brands