Panasonic CZ-RTC5A, Installation Instructions Manual

Page: 7 / 15

7
(EN)
1
Remove the bottom case.
Attention
Mounting the bottom case
 Tighten the screws securely until
the screw heads touch the bottom
case.
(Otherwise, loose screw heads may
hit the PCB and cause malfunction
when mounting the top case.)
 Do not over-tighten the screws.
(The bottom case may be deformed,
resulting in fall of the unit.)
Connecting the remote control wiring
 Arrange the wires as shown in the illustration for

in
step 2, avoiding unnecessary wires being stored in the
remote controller case.
(Caught wires may destroy the PCB.)
 Avoid wires touching parts on the PCB.
(Caught wires may destroy the PCB.)
2
Mount to the wall.
Flat-blade
screwdriver
Insert the
driver and
slightly turn.
Bottom
case
Mounting
Exposed type
1 3
2
Mount the top case.
 Align the claws of the top
case and then align the
claws of the bottom case.
Preparation: Make 2 holes for screws using a driver.
Mount the bottom case to the wall.
Cut here with a
nipper and remove
the burr with a
fi le.
Claw (2 places)
Screw
(Supplied)
Hole for screw
Claw (2 places)
Wall to which
the remote
controller is
fi xed
Connect the remote control
wiring
 Arrange the wires along the groove
of the case.
Clamper
(supplied)
Pass through
the hole
Remote controller terminal board
Remove the coating. Approx. 6 mm
Remove the sheath. Approx. 160 mm
Make sure the wiring connection
is in the correct direction.
Bottom case
(Back side)
Top case
(Back side)
AMP Air Conditioning www.ampair.co.uk | sales@ampair.co.uk