6
Indoor unit (I/D) and Outdoor (O/D) unit are included in Air conditioner
(A/C unit).
The setting contents
described on pages 6 to
7 can be set on the main
menu.
Adaptor Setting
1
Press
.
1
4
5
6
2
3
2
Enter the time for the cloud adaptor to determine the
communication with the air conditioner has failed.
(Possible input range: 5 to 99 minutes)
3
Enter [Communication interval with A/C unit].
(Possible input range: 5 to 99 minutes)
4
Select either [enable] or [disable] for [Link No.1] and
[Link No.2] respectively.
5
Select [Minimum pulse input detection time setting].
(30ms,100ms)
6
Press
.
• Dialogue will be shown to con
fi
rm restart.
To cancel
Press
.
• The input screen will be discarded, and go to the main menu.
Note
• Please take note of the input contents displayed when the OK
button is pressed.
7
Press
.
• The settings are
applied, and the
cloud adaptor
restarts.
7
Attention
• After a certain period of time, a login screen is displayed in the
web browser. Enter the user name and password again, and go
to the main menu.
Air Conditioner Setting
1
Press
.
1
2
Press
.
• Air conditioners connected to the cloud adaptor are detected, and
the A/C unit list is updated.
To change
the link no. to
display
Select the link
no. for
3
2
5
4
3
Check if the connected indoor units are all displayed,
and con
fi
rm that the number of the connected outdoor
units and the number of detected units correspond
with each other.
If some of the indoor units are not displayed/
unexpected indoor units are displayed.
Check if wiring is properly done, or the address setting for air
conditioners is correct.
→
After correction, redo from step 2.
4
Enter the central address.
To assign manually
Select the central address text
box of the indoor unit on the
[A/C Unit List] screen, and
enter it.
To assign automatically
Press
.
• Values that have been unused
within the same link no. are
input in the blank
fi
eld in
ascending order.
5
Press
.
• The input central address is applied to all the indoor units.
Attention
• Be sure to set the central
address for the indoor unit to
control and monitor using the
cloud adaptor.
Note
• If the text box is blank or any
duplication is present between
main indoor units, an alarm is
displayed.
Air Conditioner Test Operation
1
Check if
and
properly work.
2
3
1
2
Press
.
• Check if pressing the button switches the ON/OFF display in the
control
fi
eld of the corresponding indoor units and the ON/OFF
operation of the actual indoor units.
• Check all the indoor units for proper operation.
• Check the status while communicating over a radio device with
the PC operator.
3
Press
.
• The main menu is displayed.
• If [Con
fi
rm central address] button is not pressed after changing
the central address, a con
fi
rmation screen is displayed.
→
Selecting [YES] discards the changed contents.
Setting
(continued)
CZ-CFUSCC1̲工説̲E.indd 6
CZ-CFUSCC1̲工説̲E.indd 6
2016/02/17 15:50:55
2016/02/17 15:50:55
