16
8.
When the connection of WLAN
Adaptor to router is successful, the
LINK LED changes from blinking to
ON.
* It may take up to few minutes before
changes to ON.
<Note>
● If the LINK LED is ON, connect the
smartphone to wireless router. (return
to this application after completing the
wireless network settings to continue the
setup)
● If the LINK LED continues to blink, check
the wireless router connection.
● When the “SETUP” button on the WLAN
Adaptor can not be operated or when you
can not check the LED
1. Wait one minute.
(waiting for the WLAN Adaptor to be
connected to the wireless router)
2. Tap “To wireless network settings of the
smartphone.”.
Select the air conditioner and
set the password
1.
Select the air conditioner model to
register the device.
2.
Press the “SETUP” button on the
WLAN Adaptor.
Tap “Next”.
<Note>
● When the “SETUP” button on the WLAN
Adaptor can not be operated or when you
can not check the LED
1. With the remote controller, set the air
conditioner to fan mode.
2. Stop the air conditioner with the remote
controller.
3. Tap “Next”.
1_WLAN Adaptor_CZ-CAPWFC1_En.indd 16
2018/12/27 18:13:54
