14
3.
Press and hold the “SETUP” button
on the WLAN Adaptor for 5 seconds.
4.
Release the “SETUP” button on the
WLAN Adaptor when the LINK LED
blinks once.
5.
Tap "Next" when the LINK LED starts
to blink continuously.
6.
When the connection of WLAN
Adaptor to router is successful, the
LINK LED changes from blinking to
ON.
* It may take up to few minutes before
changes to ON.
<Note>
● If the LINK LED continues to blink, check
the wireless router connection.
Connection network using AP
mode (method 2)
1.
Press and hold the “SETUP” button
on the WLAN Adaptor for 10 seconds.
2.
Release the “SETUP” button on the
WLAN Adaptor when the LINK LED
blinks twice.
3.
Tap "Next" when the LINK LED starts
to blink continuously.
<Note>
● When the “SETUP” button on the WLAN
Adaptor can not be operated or when you
can not check the LED
1. Operate the air conditioner with remote
controller.
2. With the remote controller, set the air
conditioner to fan mode.
3. Tap “Next”.
1_WLAN Adaptor_CZ-CAPWFC1_En.indd 14
2018/12/27 18:13:52
