12
Settings after completing installation
Basic settings flow
1
Set the language and time zone on
this unit.
→ Setting the language and time zone ([Language/
Timezone settings]) P.14
2
Set the time and date on this unit.
→ Setting the date and time ([Date settings]) P.16
3
Confirm the configuration of the air
conditioning system.
→ Confirming system configuration ([Check
configuration]) P.17
4
Set addresses and group
memberships for the indoor units.
→ Basic settings on the indoor unit ([I/D unit settings])
P.18
5
Name the area groups.
→ Changing the name of the area group ([Area group
name settings]) P.21
Make settings for steps 6 to 9 as necessary.
6
Name the distribution groups.
→ Changing the name of the distribution group
([Distribution group settings]) P.23
7
Register distribution groups to be
measured in the pulse meter.
→ Basic settings for the pulse meter ([Pulse meter
settings]) P.25
8
Set the mode used for distributing
when calculating charges.
→ Set the distribution mode ([Distribution mode settings])
P.27
9
Set specified days, cut-off days,
and target time slots for calculating
distributions.
→ Basic settings for distribution calculation ([Calendr
sttngs for distr calc]) P.28
Setting finished
Set up flow for different operating styles
: Settings required.
: Settings may be required.
: Settings not required.
Step
Category step
Setting
Screen menu names
Operation
Air
conditioning
operations
only
Distribution rate
display only
Quantity used,
charges display
Time
Load
Time
Load
1
Date settings
Setting the current date and time
Date settings
2
Composition
loading
Confirming the connection
configuration
Check configuration
3
Unit related
Central address*
1
I/D unit settings
Name of the indoor units
I/D unit settings
Distribution group
I/D unit settings
Area group
I/D unit settings
*
2
Control group
I/D unit settings
Not batch, not managed
I/D unit settings
Name of the outdoor units
O/D unit settings
Local remote controller prohibition
setting
A/C communication settings
4
Group related
Name of the area group
Area group name settings
*
2
Name of the distribution group
Distribution group settings
Name of the schedule group
Schedule group name settings
5
Pulse meter
related
Association with the distribution
group
Pulse meter settings
Type of pulse meter (electricity/
gas), multiplying factor (number of
pulse units)
Pulse meter settings
Name of the pulse meter
Pulse meter settings
CZ-256ESMC3_QR_EU.indd 12
2016/09/12 17:13:21
