Panasonic CZ-01ESM11P, Operation Manual

Page: 16 / 17

32
ENGLISH
ESP
AÑOL
IT
ALIANO
NEDERLANDS
PORTUGUES
DEUTSCH
FRANÇAIS
E
VV
HNIKA VV
Installation table
When installing the equipment, mark the zone No. of each group and installation location in
the below table.
Setting group No.
(Setting is not possible unless power is activated to both the central
remote controller and indoor unit.)
Operated by remote controller
1. Activate power to both the central remote controller and indoor unit.
2. While in the normal mode, hold down the “
TEST
” button for a
minimum of 4 seconds. The unified ON/OFF controller will enter the
FIELD SET MODE.
3. Select the MODE No. “ ” with the “ ” button.
4. Use the “ ” button to select the group No. for each group. (Group
No. increases in the order of 1-00, 1-01 ... 1-15, 2-00, ... 8-15.)
5. Press “ ” to set the selected group No.
6. Press “
TEST
” to return to the NORMAL MODE.
Operated by simplified remote controller
1. Activate power to both the central remote controller and indoor unit.
2. Remove the upper part of the remote controller.
3. Press the BS6 BUTTON (field set) on the PC board. The controller
will enter the FIELD SET MODE.
4. Select the MODE No. “ ” with the BS2 BUTTON and BS3
BUTTON (temperature setting).
5. Use the BS9 BUTTON (set A) and BS10 BUTTON (set B) to select
the group No. for each group. (Group No. increases in the order of 1-
00, 1-01 ... 1-15, 2-00, ... 8-15.)
6. Press BS7 BUTTON (set/cancel) to set the selected group No.
7. Press BS6 BUTTON (field set) to return to the NORMAL MODE.
Zone No.
Group No. 1 –00 1 –01 1 –02 1 –03 1 –04 1 –05 1 –06 1 –07 1 –08 1 –09 1 –10 1 –11 1 –12 1 –13 1 –14 1 –15
Indoor unit
Quantity of units
Controlled by
Location
Zone No.
Group No. 2 –00 2 –01 2 –02 2 –03 2 –04 2 –05 2 –06 2 –07 2 –08 2 –09 2 –10 2 –11 2 –12 2 –13 2 –14 2 –15
Indoor unit
Quantity of units
Controlled by
Location
Zone No.
Group No. 3 –00 3 –01 3 –02 3 –03 3 –04 3 –05 3 –06 3 –07 3 –08 3 –09 3 –10 3 –11 3 –12 3 –13 3 –14 3 –15
Indoor unit
Quantity of units
Controlled by
Location
Zone No.
Group No. 4 –00 4 –01 4 –02 4 –03 4 –04 4 –05 4 –06 4 –07 4 –08 4 –09 4 –10 4 –11 4 –12 4 –13 4 –14 4 –15
Indoor unit
Quantity of units
Controlled by
Location
AIR CONDITIONER
SETTING
TEST
4 3
5
2.6
GROUP NO.
MODE NO.
FIELD SET
MODE
▼ ▼
▼
UNIT
5
5 6
3 ・ 7
4
4
BS2
BS1
BS3
BS4
BS6 BS7 BS8 BS9 BS10
BS5
GROUP NO.
MODE NO.
▼
▼