Panasonic CY-VM7203N Operating Instructions Manual Download Page 5

8

English

CY-VM7203N

9

English

CY-VM7203N

Features

7-inch wide LCD (Liquid Crystal Display) 

Delivers images of high quality and superb colour 
reproduction. 

Multi-standards (PAL, NTSC and SECAM) 

Automatically switching to PAL, NTSC and SECAM allows 
you to use a connected device without concern for its 
video standard. 

Note:

 It is not possible to check the video format just by 

looking at the image on the screen.

  The format cannot be checked from the OSD display 

either, but that does not indicate a malfunction.

  Check the disc format of the image displayed on 

this monitor through menu operations on the device 
connected to the monitor. For details, refer to the 
instruction manual of the connected device. 

Fully powered display positioning 
mechanism 

Positioning of the display unit is fully power driven. 
This includes extending the unit, raising it to upright 
position, adjusting its vertical (tilt) angle. 

Built-in automatic dimmer 

The brightness of the screen is automatically adjusted in 
response to surrounding brightness. 

To enjoy the TV broadcast 

Connect Panasonic TV tuner (CY-TUP153N, option) and 
TV antenna (supplied with CY-TUP153N).  

3 video input terminals (2 video and 1 set 
of AV), 1 set of AV output terminal and 
RGB input connector

A DVD player/receiver, TV tuner or Rear View Camera 
can be connected to the video input terminals, a second 
monitor, can be connected to the video output terminals, 
and a Panasonic Car Navigation System can be connected 
to the RGB input connector. 

ID Code 

4-digit ID code for increased security. 

CY-VM7203N 

DVD player/receiver: 

CQ-D5501N,  option    

TV tuner: 
CY-TUP153N, option

Car Navigation System: 
CN-DV2300N, option    

This unit can be combines with other components like shown below. For more details, refer to the operating instructions 
for the connected devices. 

Note:

 It is not possible to check the video format just by looking at the image on the screen.

  The format cannot be checked from the OSD display either, but that does not indicate a malfunction.
  Check the disc format of the image displayed on this monitor through menu operations on the device connected to the 

monitor. For details, refer to the instruction manual of the connected device. 

 Market conditions regarding optional devices vary with countries and regions. Fur further information, consult your 

dealer. 

 Car Navigation System (CN-DV2300N, option) is not for sale in some countries and regions.

(Rear View Camera)

System Connection Example 

7

8

Rear monitor: 
CY-VHD9401N, option    

Panasonic welcomes you to our constantly growing family of electronic products owners. We endeavor to give you the 
advantages of precise electronic and mechanical engineering, manufactured with carefully selected components, and 
assembled by people who are proud of the reputation their work has built for our company. We know this product will 
bring you many hours of enjoyments, and after you discover the quality, value and reliability we have built into it, you too 
will be proud to be a member of our family. 

CY-VM7203N 
In-dash 7

 Widescreen Color LCD Monitor

In Case You Forget the ID Code... 

In case you forget the ID code, please consult your 
nearest Panasonic Service Centre. 

ID code memo 

Copy the memo below, fi ll in the ID code, and keep it in a 
secure location. 

Model No. CY-VM7203N 

ID CODE

Fill in the ID code memo. (page 9)

Summary of Contents for CY-VM7203N























Reviews: