35
English
37
CX-DH801W
36
English
36
CX-DH801W
Troubleshooting
(Continued)
Maintenance
Error Display Messages
■
DVD Changer (Control unit / Monitor display)
Problem
Possible cause
a
Possible solution
Product Servicing
If the suggestions in the charts do not solve the problem, we
recommend that you take it to your nearest authorized
Panasonic Service center. The product should be serviced
only by a qualified technician.
If the Unit Begins to
Malfunction...
Reset switch
Insert a hard, slender stick
straightforward
into the hole and
push the switch.
Important
Push the switch only when the unit fails to operate with any
buttons. (Stored settings and adjustments are not cleared.)
If the unit fails to return to normal condition, call the nearest
Panasonic Service center and ask for repairs.
Caution on Cleaning
Your product is designed and manufactured to ensure a
minimum of maintenance. Use a dry soft cloth for routine
exterior cleaning. Never use benzine, thinner or other sol-
vents.
Alcohol
Pesticide
Wax
Benzine
Thinner
Product Servicing
Use fuses of the same specified rating
(5 A)
. Using different
substitutes or fuses with higher ratings, or connecting the
unit directly without a fuse, could cause fire or damage to
the unit.
If the fuse blows frequently, there may be something
wrong with the unit. Consult your nearest Panasonic
Service Center for service.
H
A
M4X5mmMAX
B
C
V
H.A
H
C
V.A.B
V
B
C
Reset Switch
No magazine is in the changer.
a
Load the changer with disc-loaded magazine.
NO MAGAZINE
No disc is in the changer.
a
Insert disc into the disc tray.
NO DISC
An attempt was made to play a disc with a region number other than “3” or
“ALL”. Or, the unknown error related with discs occurs.
a
Check the disc.
- E 6 -
(Control unit display)
(REGION ERROR etc.)
(Next disc will be selected
automatically after 5 seconds.)
No operation by some cause.
a
Once turn the ACC switch off, and turn it on again. And, push the reset
switch (
a
next page). If these operations fail, call the store where you
purchased the unit or the nearest Panasonic Service center.
- E 3 -
(Control unit display)
(Next disc will be selected
automatically after 5 seconds.)
Disc has scratches.
a
Check the disc.
- E 2 -
(Control unit display)
(Next disc will be selected
automatically after 5 seconds.)
Disc is dirty, or is upside down.
a
Check the disc.
- E 1 -
(Control unit display)
(Next disc will be selected
automatically after 5 seconds.)
Note:
There may be cases when the disc numbers affected by an error are displayed before E1 and E2.
■
DVD Changer (Monitor display)
An attempt was made to play a disc with a region number other than “3” or
“ALL”.
a
Check the disc.
REGION ERROR
(Next disc will be selected
automatically after 5 seconds.)
The type of disc that is selected is not supported.
a
Check the disc.
THIS TYPE OF DISC
CANNOT BE PLAYED.
(Next disc will be selected
automatically after 5 seconds.)
The mechanism of DVD changer has failed.
a
Once turn the ACC switch off, and turn it on again. And, push reset switch
(
a
next page). If these operations fail, call the store where you pur-
chased the unit or the nearest Panasonic Service center.
MECHANICAL ERROR
Disc is dirty, or is upside down, or has scratches.
a
Check the disc.
PLAYBACK ERROR
(Next disc will be selected
automatically after 5 seconds.)
Tr
oubleshooting,
Maintenance
Fuse (5A)
