Panasonic CSC18DKU - AIR CONDITIONER - SPLIT Service Manual Download Page 26

Page: 26 / 76

- Stopped by OFF/ON operation button.
- Timer OFF activates.
- Quiet mode button is pressed.
- Operation mode is changed.

8.10. Quiet Operation

(For Cooling Operation or cooling region of Soft Dry Operation)

•

The Quiet operation is to provide quiet/cooling operation condition compare to normal operation.

•

Once the Quiet Mode is set at the remote control, the Quiet Mode LED illuminated. The sound level will reduce around 2 dB(A)
for Lo fan speed or 3 dB(A) for Hi/Me fan speed against the present operation sound level.

•

Manual Fan Speed:-

−

RPM control during Lo cool

−

RPM control during Hi & Me cool

•

Auto Fan Speed:-

•

Quiet operation stops when:-

−

Quiet button is pressed again.

−

Stopped by OFF/ON operation button.

−

Timer OFF activates.

−

Powerful button is pressed.

CS-C18DKU CU-C18DKU / CS-C24DKU CU-C24DKU

Summary of Contents for CSC18DKU - AIR CONDITIONER - SPLIT













































































Search results

Summary of Contents for CSC18DKU - AIR CONDITIONER - SPLIT

Reviews:

Panasonic CSC18DKU - AIR CONDITIONER - SPLIT, Service Manual, Page: 26 / 76

Search results

Summary of Contents for CSC18DKU - AIR CONDITIONER - SPLIT

Reviews: