120
17.1.1.2 To Remove Electronic Controller
Figure 3
Figure
4 Figure
5
3 Hooks (Top, left & right side)
5. Remove the control board cover
by releasing the 3 hooks.
6. Detach the earth wire screw, terminal wire (Brown),
terminal wire (Grey), terminal wire (Black), terminal wire (White),
terminal wire (Red) and earth wire (Green).
9. Pull out the electronic
controller halfway.
8. Remove screw to
remove terminal
board complete.
7. Remove the indicator complete then detach the
connectors CN-DISP and CN-RCV.
10. Detach all connectors as labled from the
electronic controller. Then pull out
electronic controller gently.
CN-TH
CN-CNT
CN-FM
CN-HT
CN-STM2
CN-NANO
CN-STM1
CN-STM3
CN-RMT
CN-RCV
CN-DISP
CN-WLAN
