English
11
How to use
Auto Restart Control
• If power is resumed after a power failure, the
operation will restart automatically after a period
of time with previous operation mode and airflow
direction.
• This control is not applicable when TIMER is set.
• To cancel ON or OFF timer, press
or
then press
.
• If timer is cancelled manually or due to power
failure, you can restore the timer again by
pressing
or
then press
.
• The nearest timer setting will be displayed and
will activate in sequence.
• When ON Timer is set, the unit may start
earlier (up to 15 minutes) before the actual
set time in order to achieve the desired
temperature on time.
• Timer operation is based on the clock set in
the remote control and repeats daily once set.
For clock setting, please refer to Quick guide.
TIMER
50
30
This operation is to achieve faster cooling.
This operation stops automatically after 1 hours.
If AUTO air swing is set, the louver swings
up/down automatically.
•
•
• nanoe-G starts automatically when the unit is
turned on with .
• Can be activated even when the unit is turned
off. In this condition, the unit will operate as a fan
with AUTO fan speed and louver swing.
nanoe-G
nanoe-G
PURIFIER
SLEEP /
POWERFUL
(Low)
(Medium)
(High)
C
M
Y
CM
MY
CY
CMY
K
ACXF55-2303̲OL.ai 11 11/14/2018 10:08:26 AM
ACXF55-2303̲OL.ai 11 11/14/2018 10:08:26 AM
