background image

ENGLISH

5

 

WARNING

WARNING

POWER SUPPLY

If the supply cord is damage, it must be replaced 

by the manufacturer, its service agent or similarly 

qualifi ed persons in order to avoid a hazard.
It is strongly recommended to be installed 

with Earth Leakage Circuit Breaker (ELCB) 

or Residual Current Device (RCD) to prevent 

electric shock or fi re.
To prevent overheating, fi re or electric shock:

•  Insert the power plug properly.

•  Dust on the power plug should be periodically 

wiped with a dry cloth.

Stop using the product if any abnormality/failure 

occurs and disconnect the power plug or turn off 

the power switch and breaker.

(Risk of smoke/fi re/electric shock)
Examples of abnormality/failure

•  The ELCB trips frequently. 

•  Burning smell is observed.

•  Abnormal noise or vibration of the unit is 

observed.

•  Water leaks from the indoor unit. 

•  Power cord or plug becomes abnormally hot.

•  Fan speed cannot be controlled.

•  The unit stops running immediately even if it is 

switched on for operation.

•  The fan does not stop even if the operation is 

stopped.

Contact your local dealer immediately for 

maintenance/repair.
This equipment must be earthed to prevent 

electrical shock or fi re.

Prevent electric shock by switching off the power 

supply and unplug when:

- Before cleaning or servicing.

- Extended non-use.

- Abnormally strong lightning activity.

 

CAUTION

CAUTION

INDOOR UNIT AND OUTDOOR UNIT

Do not wash the indoor unit with water, benzene, 

thinner or scouring powder to avoid damage or 

corrosion at the unit.
Do not use for preservation of precise 

equipment, food, animals, plants, artwork 

or other objects. This may cause quality 

deterioration, etc.
Do not use any combustible equipment in front of 

the airfl ow outlet to avoid fi re propagation.
Do not expose plants or pet directly to airfl ow to 

avoid injury, etc.
Do not touch the sharp aluminium fi n, 

sharp parts may cause injury.

Do not switch ON the indoor unit when waxing 

the fl oor. After waxing, aerate the room properly 

before operating the unit.
Do not install the unit in oily and smoky areas to 

prevent damage to the unit.
Do not dismantle the unit for cleaning purpose to 

avoid injury.
Do not step onto an unstable bench when 

cleaning the unit to avoid injury.
Do not place a vase or water container on the 

unit. Water may enter the unit and degrade the 

insulation. This may cause an electric shock.
Do not open window or door for long time during 

COOL/DRY mode operation.
Ensure drainage pipe is connected properly and 

keep drainage outlet clear of gutters, containers 

or does not immersed in water to prevent water 

leakage.
After a long period of use or use with any 

combustible equipment, aerate the room 

regularly.
After a long period of use, make sure the 

installation rack does not deteriorate to prevent 

the unit from falling down.

REMOTE CONTROL

Do not use rechargeable (Ni-Cd) batteries.

It may damage the remote control.

To prevent malfunction or damage of the remote 

control:

•  Remove the batteries if the unit is not going to 

be used for a long period of time. 

•  New batteries of the same type must be 

inserted following the polarity stated. 

POWER SUPPLY

Do not pull the cord to disconnect the plug to 

prevent electric shock.

Summary of Contents for CS-W7NKD












Reviews: