Panasonic CS-VG120KE, Service Manual

Page: 27 / 80

8.8. OUTDOOR FAN CONTROL
∙ Outdoor fan motor is controlled with 2 speeds. Fan is in operation when the compressor starts operation and stops 30 seconds
after compressor stops operation.
(During 80 seconds, Fan speed is at low).
Fan Speed Compressor Operating Frequency
Cooling-Soft Dry Heating
High Over 45Hz Over 73Hz
Low Below 45Hz Below 73Hz
8.9. AIRFLOW DIRECTION
∙ Blade angle setting (Upper limit reference)
Operation Blade angle
1 2 3 4 5
heating Airflow direction auto Indoor heat exchanger
temperature
A 14°
B 61°
C 0°
Airflow direction manual - - 0° 18° 29.4° 45.1° 61°
Cooling Airflow direction auto - 0° - 37°
Anti-dew formation control 3° - 37°
Airflow direction manual - 0° 8° 18° 28° 37°
Anti-dew formation control 3° 11.5° 20° 28.5° 37°
Dry Airflow direction auto - 0° - 37°
Anti-dew formation control 3° - 37°
Airflow direction manual - 0° 8° 18° 28° 37°
Anti-dew formation control 3° 11.5° 20° 28.5° 37°
Stop 138°
∙ Sitting angle
1. Airflow Direction Manual
By pressing the remote control airflow direction setting switch, the blade will move to the indicated angle (1, 2, 3, 4, 5) as shown
in the table. When the remote control OFF/ON switch is pressed, the blade will move to the Close position.
2. Airflow Direction Auto
By setting the airflow direction to AUTO, the blade swings up and down from 0°-37° during Cooling and Soft Dry operation.
During Heating operation, the blade angle will shift according to the indoor heat exchanger temperature as shown below:
27
CS-VG120KE / CU-VG120KE